Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Chimney Sweep in Las Vegas: What to Know First
A chimney sweep for an Olympia Chimney fireplace or liner in Las Vegas typically costs $189 – $289 before any repairs, takes about 60 – 90 minutes, and should be done every 40 – 50 burns or at least once a year if you use your fireplace regularly. We’re Alcott Chimney Las Vegas, an independent Olympia Chimney service provider, and we’ve been sweeping and servicing these units across the Las Vegas Valley since 2002. This page is for homeowners who own an Olympia Chimney product and want a straight answer on what a sweep involves, what it costs, and what actually happens when we find something that needs more than a cleaning. If you’d rather just talk to someone, call (725) 227-7352 and a live person answers, day or night.
How Olympia Chimney Products Fail – and How We Fix Them
Olympia Chimney builds solid products, but every brand has its patterns. Here’s what we see most often on Olympia units in Las Vegas homes, and what we do about it:
- Creosote glazing on Olympia prefab flue tiles. The Olympia stainless and refractory flue systems used in many Las Vegas tract homes from the 1990s and 2000s develop a hard, shiny creosote layer faster than older masonry chimneys. Because the flue diameter is often smaller than a traditional masonry chimney, the same amount of burning produces a thicker deposit. We remove it mechanically with rotary loops and brushes sized to Olympia flue dimensions, not the generic brushes that leave glaze in the corners.
- Draft complaints on the Olympia 6500 series. Homeowners near Summerlin and The Lakes tell us their Olympia fireplace smokes back into the room on windy days. What we regularly find: the factory-installed flue cap wasn’t sized for Las Vegas’s clear, gusty afternoons in March and April. Sometimes it’s not a draft problem at all; it’s a partially blocked flue from nesting season. We camera-inspect the full length before recommending any liner or cap work, and you see the footage.
- Stuck or seized damper assemblies on Olympia prefab units. The cast iron dampers on older Olympia fireplaces corrode in our dry climate, but more often they seize because soot and fine creosote particles packed into the pivot points over one or two seasons of casual burning. That’s a thirty-minute fix with the right lubricant and a proper cleaning, not a replacement part unless the casting is actually cracked.
- Refractory panel spalling on Olympia zero-clearance models. The refractory panels inside Olympia factory-built fireplaces can start flaking after years of heat cycling in Las Vegas’s temperature swings between hot days and cold desert nights. Small cracks are cosmetic and safe to leave alone. When a panel has shifted or crumbled to the point that the metal firebox is exposed, that’s a repair we quote before doing, with the part number on the invoice.
- Warped or rattling chimney chase tops. On Olympia installations with a wooden chase, the galvanized chase top can warp from expansion and contraction. Water gets in around the flue pipe and shows up as staining on the ceiling below. We inspect the flashing and chase top during a sweep, and we’ll show you exactly what we found with the camera.
Styles & brands we work with
Our Olympia Chimney Chimney Sweep Process
Here’s how a typical Olympia Chimney chimney sweep works when you call us:
- 1
You call and get a live person. Our phones are answered around the clock. We gather the basics about your Olympia fireplace or chimney, and we give you a written price for the sweep before the truck ever pulls out of our lot.
- 2
You know exactly who’s coming. Before arrival, you’ll receive the technician’s name and photo. That technician is background-checked and identity-verified under what we call the Threshold Standard, and they’ll show a photo ID badge at your door. Every time, no exceptions.
- 3
We protect the room, then sweep. We lay down drop cloths, verify airflow, and run a rotary brush system sized for your Olympia flue. We capture creosote, soot, and any nesting debris, then we clean the smoke chamber, damper, and firebox.
- 4
We camera-inspect the flue. After every sweep, we run a camera through the full flue. You see the screen with us. If we find anything needing attention – cracked tile, a gap in an Olympia liner joint, rust or water entry – we tell you plainly, and we show you the image, not just our word for it.
- 5
If a repair is needed, you get a written price first. Before any work begins beyond the sweep, you’ll have a written quote that includes exact scope and material. We use professional-grade replacement parts and liners – DuraFlex liner systems, HeatShield resurfacing, Gelco patches, and Olympia Chimney components where they’re specified.
- 6
We clean up and put it in writing. We’ll clear the work area and leave the fireplace ready to burn. Every repair we do comes with a written guarantee. If the repair fails within the coverage period, the second visit is free. That’s our 365-Day Done Right Promise, and it’s non-negotiable – it’s included on every job.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Chimney Chimney Sweep Costs in Las Vegas
A standard Olympia Chimney chimney sweep in Las Vegas runs $189 – $289 before any repairs. A Level 1 inspection is included with every sweep we do. If we need to run a camera – which we recommend after any sweep where the homeowner reports smoke odor or draft issues – a Level 2 inspection adds about $150 – $200. What drives the final price: how much creosote has built up, whether we’re removing a bird nest or debris blockage, and the flue length on your specific home. Simple truth: if your Olympia fireplace hasn’t been swept in more than two seasons, expect to be on the higher end. Call (725) 227-7352 for an exact quote – estimates are free, and the price we quote is the price you pay.
Why Las Vegas Homeowners Call Alcott Chimney Las Vegas for Olympia Chimney Work
Most chimney companies in Las Vegas will clean an Olympia Chimney the same way they clean any other. We treat your unit like the specific product it is, because our technicians work with Olympia Chimney products regularly and know how they behave in this climate. We’re an independent Olympia Chimney service provider, not manufacturer-authorized, which means we’re free to tell you when a cheaper aftermarket part is honestly fine, and when only the OEM component will hold up. We also carry and install DuraFlex, HeatShield, and Gelco products, so if your Olympia chimney needs a liner repair or a resurfacing, we can recommend what actually works for your situation. Every job comes with a written price before work starts, a written guarantee on every repair, and a free return visit if the repair fails. Ruben Castellano has been running inspections and cleanings all over the Las Vegas Valley for well over a decade, and his rule is simple: “Tell me what you’re seeing, and I’ll tell you straight what it means.”
FAQs
At least once every 40 – 50 fires, or once a year if you burn regularly from November through February. Even though Las Vegas winters are mild, the dry air and occasionally damp firewood sold locally produce creosote faster than you’d expect, especially on the narrower flue systems Olympia uses. If you smell smoke when the fireplace is running, call us sooner. Schedule your sweep by calling (725) 227-7352 and we’ll find a time that works.
No, a professional chimney sweep does not void an Olympia Chimney warranty. In fact, failing to clean the flue is one of the most common reasons manufacturers reject warranty claims for premature deterioration or fire-related damage. We document every sweep with photos and a written service record, which is exactly the paper trail you’ll want if a warranty claim ever comes up.
It depends on the part and the situation. For critical components like a cracked refractory panel or a damper assembly on a still-warrantied Olympia unit, we specify genuine Olympia Chimney parts. For non-critical items like caps, dampers, or flue components where an aftermarket or equivalent part meets or exceeds the original spec, we’ll tell you the cost difference and let you decide. We never install box-store substitutions on anything that touches the flue or firebox.
Creosote keeps building up, and once it reaches about 1/8 inch of thickness, it becomes fuel for a chimney fire. You might also start noticing smoke backing into the room, a campfire smell that lingers for days, or, in the worst cases, carbon monoxide leaking into the house because the flue can’t vent properly. On Olympia prefab units, the flue is often narrower, so these problems can happen after fewer fires than you’d expect. If you’re not sure when your chimney was last swept, call (725) 227-7352 and we’ll give you a straight answer.
We can diagnose liner damage the same visit, but installing a replacement liner – usually a DuraFlex system or another professional-grade product we carry – is a follow-up job that we’ll schedule and price in writing before you commit. If the damage is minor, like a small crack, we can sometimes patch it with HeatShield resurfacing material. We’ll show you the camera footage and explain exactly what you need.
Written by Ruben Castellano, Owner, Alcott Chimney Las Vegas at Alcott Chimney Las Vegas, serving Las Vegas and nearby areas.